The turret config file can be found in the configs directory of the turret home directory. Most entries should be left alone, but it may be desirable to make some changes. For example, the Home and Down positions are held here as DOWN_AZIMUTH, DOWN_ELEVATION, HOME_AZIMUTH and HOME_ELEVATION. Another important entry is AZ_LAST_POS, which is the last known position of the telescope in azimuth. If this value does not correspond to where the telescope is prior to initialisation, the software may obtain incorrect coordinates. AZ_LAST_POS should be about 1.4 when in the home position and about 1.6 for 180 degrees.
At present, you need to be the root user to make changes to the turret config file. Please ask SST staff to log you in. Also, any changes made will only take effect after restarting the software.